Owners manual

Tips for working with cartridges
Use the following tips to work with cartridges:
●
To prevent print-quality problems, do the following:
◦
Always turn the printer o using the power button on the front, and wait until the power button
light goes out.
◦
Make sure that all the cartridge slots are lled.
●
If you remove a cartridge from the printer for any reason, try to replace it again as soon as possible.
●
Do not open or unpackage cartridges until you are ready to install them.
●
Insert the cartridges into the correct slots. Match the color and icon of each cartridge to the color and
icon for each slot. Make sure the cartridges snap into place.
●
When the Estimated Cartridge Levels screen shows one or more cartridges in a low state, consider
getting replacement cartridges to avoid possible printing delays. You do not need to replace the
cartridges until prompted to. See Replace cartridges for more information.
●
Do not clean the printhead unnecessarily. This shortens the life of the cartridges.
●
If you are transporting the printer, do the following to prevent leaking from the printer or other damage
from occurring.
◦
Make sure you turn o the printer by pressing the power button in the front. Wait until all sounds
of internal motion stop before unplugging the printer.
◦
Make sure you leave the cartridges installed.
◦
The printer must be transported sitting at; it should not be placed on its side, back, front, or top.
62 Chapter 5 Cartridges ENWW