Owners manual

To load letterhead or preprinted forms with ALM enabled
1. Depending on the tray, orient the paper as follows.
Tray 1 Other tray(s)
Place the letterhead face-up, with the top of the page oriented
toward the left.
Place the letterhead face-down, with the top of the page
oriented toward the right.
2. Complete the steps in Load Tray 1, Load Tray 2, Load optional Tray 3, or Load optional Tray 4.
To load letterhead or preprinted forms with ALM disabled
1. Depending on the tray, orient the paper as follows.
Tray 1 Other tray(s)
Simplex Place the letterhead face-down, with the top of
the page oriented toward the right.
Place the letterhead face-up, with the top of the
page oriented toward the left.
Duplex Place the letterhead face-up, with the top of the
page oriented toward the left.
Place the letterhead face-down, with the top of
the page oriented toward the right.
2. Complete the steps in Load Tray 1, Load Tray 2, Load optional Tray 3, or Load optional Tray 4.
Load the automatic document feeder
The automatic document feeder (ADF) holds up to 50 sheets of 75 g/m
2
(20 lb bond) paper.
NOTICE: When using the automatic document feeder (ADF), make sure that your documents contain no
staples, paper clips, tape, or similar items that can damage the product.
1. Open the ADF paper guides.
2. For longer documents, pull the ADF loading area extension outward if necessary.
52 Chapter 4 Paper and print media ENWW