Owners manual
3. Touch Web Services Setup.
4. Touch Accept to accept the Web Services terms of use and enable Web Services.
5. On the screen that appears, touch OK to allow the printer to automatically check for product updates.
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the onscreen
instructions to set up a proxy server. If you do not have the proxy details, contact your network
administrator or the person who set up the network.
6. If the Printer Update Options screen appears, touch Install Automatically (Recommended) or Alert When
Available
.
7. When the printer is connected to the server, the printer prints an information page. Follow the
instructions on the information page to nish the setup.
To set up Web Services using the EWS
1. Open the EWS. For more information, see Open the EWS.
2. Click the Web Services tab.
3. In the Web Services Settings section, click Setup, click Continue, and follow the onscreen instructions
to accept the terms of use.
4. If prompted, choose to allow the printer to check for and install printer updates.
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the onscreen
instructions to set up a proxy server. If you do not have the proxy details, contact your network
administrator or the person who set up the network.
5. When the printer is connected to the server, the printer prints an information page. Follow the
instructions on the information page to nish the setup.
Use Web Services
●
HP ePrint
●
Print apps
HP ePrint
To use HP ePrint, do the following:
●
Be sure you have an Internet- and email-capable computer or mobile device.
●
Enable Web Services on the printer. For more information, see Set Up Web Services.
For more information about managing and conguring HP ePrint settings and to learn about the latest
features, visit HP Connected . This site might not be available in all countries/regions.
32 Chapter 3 Printer management and services ENWW