Owners manual

Menu Item Description
Network Conguration Page Displays status for:
●
Network hardware conguration
●
Enabled features
●
TCP/IP and SNMP information
●
Network statistics
●
Wireless network conguration (wireless models only)
Event Log Prints a log of errors and other events during product use.
Fax Reports
●
Fax Conrmation: Sets whether the product prints a conrmation report after a successful fax job.
●
Fax Error Report: Sets whether the product prints a report after a failed fax job.
●
Last Transaction: Prints a detailed report of the last fax operation, either sent or received.
●
Fax Logs: The fax service log prints out the last 40 entries in the fax log.
●
Speed Dial List
●
Caller ID Report: Prints a list of all incoming fax phone numbers
●
Junk Fax Report: Prints a list of phone numbers that are blocked from sending faxes to this product.
PCL Font List Prints a list of all installed PCL fonts
PCL6 Font List Prints a list of all installed PCL6 fonts
PS Font List Prints a list of all installed PS fonts
Factory-set defaults
NOTICE: Restoring the factory-set defaults returns all of the product and network settings to the factory
defaults, and it also clears the fax header name, phone number, and any stored faxes in the product memory.
This procedure also clears the fax phone book, and deletes any pages that are stored in the memory. The
procedure then automatically restarts the product.
1. Open the control panel dashboard (swipe the dashboard tab at the top of any screen downward, or
touch the dashboard area on the home screen).
2.
On the control panel dashboard, touch .
3. Touch Printer Maintenance, and then touch Restore.
4. Touch Restore Factory Defaults, and then touch Continue.
The product automatically restarts.
Cleaning routines
●
Clean the printhead
●
Clean the scanner glass strip and platen
116 Chapter 9 Solve problems ENWW