Owners manual

NOTE:
●
If the reports are not legible, you can check the estimated cartridge levels from the control panel or the
HP software. For more information, see Check the estimated cartridge levels.
●
Cartridge-level alerts and indicators provide estimates for planning purposes only. When you receive
a low-cartridge alert, consider having a replacement cartridge available to avoid possible printing
delays. You do not need to replace the cartridges until you are prompted to.
●
Ensure that the printheads and cartridges are in good condition and installed properly.
This section contains the following topics:
●
Print fax conrmation reports
●
Print fax error reports
●
Print and view the fax log
●
Clear the fax log
●
Print the details of the last fax transaction
●
Print a Caller ID Report
●
View the Call History
Print fax conrmation reports
You can print a conrmation report either when a fax is sent, or when any fax is sent or received. The default
setting is On (Fax Send). When turned o, a conrmation message appears briey on the control panel after
each fax is sent or received.
To enable fax conrmation
1. On the control panel, touch the Fax application folder.
2. In the display, touch the Fax Setup icon.
3. Touch Reports , and then touch Fax Conrmation.
4. Touch to select one of the following options.
Setting Description
O Does not print a fax conrmation report when you send and receive faxes successfully. This is the
default setting.
On (Fax Send) Prints a fax conrmation report for every fax you send.
On (Fax Receive) Prints a fax conrmation report for every fax you receive.
On (Fax Send and Fax
Receive)
Prints a fax conrmation report for every fax you send and receive.
To include an image of the fax on the report
1. On the control panel, touch the Fax application folder.
2. In the display, touch the Fax Setup icon.
ENWW Use reports 109