Owners manual

●
Set the Rings to Answer setting to a high number to allow you to answer the incoming call before
the printer answers.
●
Turn o the Auto Answer setting so that the printer does not automatically answer incoming calls.
4. If you are currently on the phone with the sender, instruct the sender to press Start on their fax
machine.
5. When you hear fax tones from a sending fax machine, on the control panel, touch the Fax application
folder.
6. Touch Send and Receive, and then touch Receive Now.
7. After the printer begins to receive the fax, you can hang up the phone or remain on the line. The phone
line is silent during fax transmission.
Fax memory
NAND memory protects the product against data loss when a power failure occurs. NAND can maintain data
for years without power applied.
The product stores about 10MB of memory. This is approximately 500 black-and-white A4 pages at standard
resolution, based on standard ITU-T Test Image No. 1. More complicated pages or higher resolution takes
longer and uses more memory.
Reprint a fax
1. On the control panel, touch the Fax application folder.
2. Touch Reprint.
3. Touch the entry for the fax that you want to reprint.
Delete faxes from memory
Use this procedure if you are concerned that someone else has access to your product and might try to reprint
faxes from the memory.
NOTICE: In addition to clearing the reprint memory, this procedure clears any fax that is currently being
sent, unsent faxes that are pending redial, faxes that are scheduled to be sent at a future time, and faxes that
are not printed or forwarded.
1. Open the control panel dashboard (swipe the dashboard tab at the top of any screen downward, or
touch the dashboard area on the home screen).
2.
On the control panel dashboard, touch .
3. Touch Fax Setup, and then touch Tools.
4. Touch Clear Fax Logs/Memory.
Use the phone book
You can store frequently dialed fax numbers (up to 75 entries) either as individual fax numbers or as other
phone book fax number entries.
ENWW Use the phone book 107