Owners manual

pages into memory, you can immediately remove the originals from the document feeder tray or scanner
glass.
NOTE: You can only send a black-and-white fax from memory.
To turn on the Scan and Fax method
1. Open the control panel dashboard (swipe the dashboard tab at the top of any screen downward, or
touch the dashboard area on the home screen).
2.
On the control panel dashboard, touch .
3. Touch Fax Setup, and then touch Preferences.
4. Touch Scan and Fax Method, and turn it on.
To send a fax using printer memory
1. Make sure that the Scan and Fax method is turned on.
2. Load your original print-side down on the scanner glass or print-side up in the automatic document
feeder.
For more information, see Load the scanner or Load the automatic document feeder.
3. On the control panel, touch the Fax application folder.
4. In the display, touch the Send Now icon, and follow the onscreen instructions.
5. Use the keypad to enter the fax number or select it from the phone book.
6. Touch Black or Color.
The printer scans the originals into memory and sends the fax when the receiving fax machine is
available.
Receive a fax
●
Receive a fax manually
●
Fax memory
Receive a fax manually
When you are on the phone, the person you are speaking with can send you a fax while you are still
connected. You can pick up the handset to talk or listen for fax tones.
You can receive faxes manually from a phone that is directly connected to the fax port on the back of the
product.
1. Make sure the printer is turned on and you have paper loaded in the main tray.
2. Remove any originals from the document feeder tray.
3. Do one of the following:
106 Chapter 8 Fax ENWW