Owners manual
To set up scan to a network folder
Set up scan to a network folder in the EWS
1. Open the EWS. For more information, see Open the EWS.
2. On the Scan tab, click Scan to Network Folder, and then click Network Folder Setup.
3.
In the setup page, click , and follow the onscreen instructions for adding network folder proles.
When nished, click Next .
4. In the authentication page, follow the onscreen instructions to set up credentials for logging into
SharePoint. When nished, click Next .
5. In the settings page, follow the onscreen instructions for conguring scan settings, such as paper size
and scan resolution. When nished, click Save.
Set up scan to a network folder in the HP Printer Assistant
1. Open the HP Printer Assistant. For more information, see Open the HP Printer Assistant.
2. On the Scan tab, click Scan to Network Folder Wizard and follow the onscreen instructions.
To scan to a network folder
Scan to a network folder from the control panel
1. Load your original print-side down on the scanner glass or print-side up in the automatic document
feeder.
For more information, see Load the scanner or Load the automatic document feeder.
2. On the control panel, touch the Scan application folder.
3. Touch the Network Folder icon, and then navigate to the network folder.
4. If prompted, enter the PIN.
5. Verify or change the information in the Save As and File Name elds.
6. Touch Touch to Preview, and then touch Start Scan.
Scan to a network folder from the printer software
1. Load your original print-side down on the scanner glass or print-side up in the automatic document
feeder.
For more information, see Load the scanner or Load the automatic document feeder.
2. Double-click the printer icon on the desktop and then click Scan to Network Folder Wizard.
3. Select the type of scan you want, and click Scan and follow the onscreen instructions.
84 Chapter 7 Copy and scan ENWW