Datasheet
Multi-Core technologies are designed to improve performance of multithreaded software products and
hardware-aware multitasking operating systems and may require appropriate operating system software
for full benefits; check with software provider to determine suitability; Not all customers or software
applications will necessarily benefit from use of these technologies.
64-bit computing on Intel® 64 architecture requires a computer system with a processor, chipset, BIOS,
operating system, device drivers, and applications enabled for Intel® 64 architecture. Processor will not
operate (including 32-bit operation) without an Intel® 64 architecture-enabled BIOS. Performance will vary
depending on your hardware and software configurations. See:
http://www.intel.com/info/em64t
for more
information.
Intel's numbering is not a measurement of higher performance.
Z620 processor AMO kits include:
- 2nd CPU/Memory Module (riser)
- processor
- heat sink
SAS Hard Drives
Factory
Configured
Option
Kit
Option
Kit Part
Number
Support
Notes
HP SAS (Serial Attached SCSI) Hard Drives for HP Workstations
HP 300GB SAS 10K SFF HDD
Y Y
A2Z20AA
HP 600GB SAS 10K SFF HDD
Y Y
A2Z21AA
300GB SAS 15K rpm 6Gb/s 3.5" HDD
Y Y
LU967AA
450GB SAS 15K rpm 6Gb/s 3.5" HDD
Y Y
LU968AA
600GB SAS 15K rpm 6Gb/s 3.5" HDD
Y Y
VM647AA
Sub-Section Description/Notes
NOTE:
SAS Controller add-in card required
SATA Hard Drives
SATA (Serial ATA) Hard Drives for HP Workstations
250GB SATA 7200 rpm 6Gb/s 3.5" HDD
Y Y
LQ034AA
500GB SATA 7200 rpm 6Gb/s 3.5" HDD
Y Y
LQ036AA
1TB SATA 7200 rpm 6Gb/s 3.5" HDD
Y Y
LQ037AA
2.0TB SATA 7200 rpm 6Gb/s 3.5" HDD
Y Y
QB576AA
3.0TB SATA 7200 rpm 6Gb/s 3.5" HDD
Y Y
QF298AA
250GB SATA 10K rpm SFF HDD
Y Y
B8X18AA
500GB SATA 10K rpm SFF HDD
Y Y
B8X19AA
1TB SATA 10K rpm SFF HDD
Y Y
B8X20AA
500GB SATA 7.2K SED SFF HDD
Y Y
(not
available
today as
After
Market
Option)
SATA Solid State Drives
HP Solid State Drives (SSDs) for Workstations
QuickSpecs
HP Z620 Workstation
Supported Components
DA - 14262 North America — Version 16 — March 1, 2013
Page 8