Datasheet

MEMORY UPGRADES
Memory upgrades are accomplished by adding DIMMs of the same or varied sizes.. The HP RP7 Retail System supports non-
ECC DDR3 PC3-10600 (1600 MHz) and PC3-8500 (1066 MHz) memory.
CAUTION: You must shut down the Retail System and disconnect the power cord before adding or removing memory
modules. Regardless of the power-on state, voltage is always supplied to the memory modules as long as the Retail System
is plugged in to an active AC outlet. Adding or removing memory modules while voltage is present may cause irreparable
damage to the memory modules or system board.
MEMORY CONFIGURATIONS
Slot 1
2 GB
4 GB
8 GB
SOFTWARE
HP Client Management Solutions (available for free download from hp.com/go/easydeploy )
HP SoftPaq Download Manager
HP Client Catalog for Microsoft SMS
HP Systems Software Manager
HP Client Automation Starter
NETWORK CONNECTIVITY
Broadcom BCM57788A1KMLG (Model 7100)
Optional Wireless: HP WLAN 802.11 a/b/g/n 2x2 DB MCard BT, HP WLAN 802.11 b/g/n 1x1 MCard NIC
AUDIO/MULTIMEDIA
Rear-line input (supports microphone or line input), lineout
All ports are 3.5mm in diameter
High Definition Audio with Realtek ALC221 codec (all ports are stereo)
SRS Premium Sound audio management technology
Multi-streaming capable *
Dual Internal Speakers (standard)
* Audio input ports are re-taskable as a Line-in or Microphone-in port. External speakers must be powered externally. Multi-
streaming can be enabled in the Realtek control panel to allow independent audio streams to be sent to/from the front and
rear jacks. This allows for different audio applications to use separate audio ports on the system. For example, the front jacks
could be used with a headset for a communications application while the rear jacks are being used with external speakers and
a multimedia application.
QuickSpecs
HP RP7 Retail System, Model 7100
Standard and Configurable Components
DA - 14462 North America — Version 6 — August 12, 2013 Page 15