Datasheet

STORAGE

Size

2.5"

Drive Bays

OPTIONS:

Solid State Drives

32 GB SSD, 2.5" (RAID not supported)

128 GB SSD, 2.5"

256 GB SSD, 2.5"

REDUNDANT ARRAY OF INDEPENDENT DRIVES (RAID)

Flexible implementation:

DriveLock is supported while in RAID mode. Users can manage the DriveLock password from within F10 Setup. Locked

drives will be displayed as such in the RAID option ROM interface.

Hard drive information can be viewed within F10 Setup while in RAID mode. Previously, the hard drives will not appear

in Drive Configuration when switching to RAID mode.

DPS Self Test can be executed on physical hard drives while in RAID mode.

The RAID Setup Utility (accessed through CTRL-I) can be protected by the F10 Setup password.

NOTE:

RAID 1 is the only RAID configuration offered via factory configurations. RAID is not supported on the 32GB SSD. The

pre-configured systems:

Are complete RAID systems and have both drives installed.

Have the necessary Option ROM configuration.

Are pre-loaded and pre-installed with all required Intel software.

Include a preinstalled operating system that is mirrored mode out of the box.

Please refer to the HP White Paper titled "Advanced Host Controller Interface (AHCI) and Redundant Array of Independent

Disks (RAID) on HP Compaq PCs" at:

http://www.hp.com

for more information and instructions.

MEMORY

Type

Non-ECC, DDR3 SDRAM, 1600 MHz, SODIMM

Maximum

8 GB

# of Slots

NOTE:

Full availability of 4 GB or more of memory requires a 64-bit operating system. With Windows 32-bit operating

systems, the amount of usable memory is dependent upon your configuration, so that above 3 GB all memory may not be

available due to system resource requirements.

QuickSpecs

HP RP7 Retail System, Model 7100

Standard and Configurable Components

DA - 14462 North America — Version 6 — August 12, 2013

Page 14