Reference Guide

1–6 www.hp.com Network & Internet Communications Guide
Network Communications
7. Select Link Speed/Duplex Mode in the Property list box.
8. Change the speed and duplex values to the appropriate values,
depending on the capabilities of the network.
9. Click OK. You may be prompted to restart the computer for the
changes to take effect.
Windows XP
1. Select Start > Control Panel.
2. Double-click Network Connections.
3. Double-click Local Area Connection.
4. Click Properties.
5. Click Configure.
6. Click the Advanced tab.
7. Select Link Speed & Duplex in the Property list box.
8. Change the speed and duplex values to the appropriate values,
depending on the capabilities of the network.
9. Click OK. You may be prompted to restart the computer for the
changes to take effect.
Refer to the documentation provided with the network controller for
additional information.
✎
100Base-TX and 1000Base-Tx operation requires the use of Category
5 UTP cable with an RJ-45 network connection.