HP LaserJet Pro 500 color MFP M570 - User Guide

Table Of Contents
5. Adjust another setting, or touch the back arrow to return to the main copy menu.
6. Touch the Black or Color button to start copying.
Optimize for text or pictures
The following copy-quality settings are available:
Auto Select: Use this setting when you are not concerned about the quality of the copy. This is the
default setting.
Mixed: Use this setting for documents that contain a mixture of text and graphics.
Text: Use this setting for documents that contain mostly text.
Picture: Use this setting for documents that contain mostly graphics.
1. Load the document onto the scanner glass or into
the document feeder.
2. From the Home screen on the product control
panel, touch the Copy button.
3. Touch the Settings button, and then scroll to and
touch the Optimize button. Touch the arrow
buttons to scroll through the options, and then
touch an option to select it.
4. Touch the Start Copy button to start copying.
Edge-to-edge copying
The product cannot print fully edge-to-edge. The maximum printing area is 203.2 x 347 mm (8 x 13.7 in),
leaving a 4 mm unprintable border around the page.
Considerations for printing or scanning documents with cropped edges:
When the original is smaller than the output size, move the original 4 mm (1/6 inch) away from the
corner indicated by the icon on the scanner. Recopy or scan in this position.
When the original is the size of the printed output that you want, use the Reduce/Enlarge feature to
reduce the image so the copy is not cropped.
Clean the pickup rollers and separation pad in the document feeder
If the product document feeder experiences paper-handling problems, such as jams or multiple-page feeds,
clean the document-feeder rollers and separation pad.
ENWW Improve copy quality 193