HP LaserJet Pro 500 color MFP M570 - Software Technical Reference

Allow Manual Duplexing
Select the Allow Manual Duplexing item to print on both sides of any supported size and most
types of paper (except transparencies, envelopes, and labels). To use this feature, you must reinsert the
paper stack into the input tray to print the second side. The product pauses while you make this
adjustment.
This setting is enabled by default.
Tray 3
This control specifies whether you have Tray 3, an additional 500-sheet tray, installed on the product.
Job Separator
Use this control to specify whether a print job identifier page should be printed between print jobs.
This setting is disabled by default.
About tab features
NOTE: The About tab is located on the Printer Properties tab set.
The About tab provides detailed information about driver component versions. It contains an overall
build version number (in parentheses after the model name) together with specific information about
each of the components. The information varies according to the product model number, driver, date,
and versions. The About tab is shown in the following figure.
Figure 2-13 About tab
The About tab lists driver installation file names and their version numbers. The About tab also
indicates whether the driver was autoconfigured, whether administrator preferences were set, the date
the driver was last configured, and whether the configuration is autoconfigured or user-configured.
ENWW
HP LaserJet software components for Windows®
59