HP LaserJet Pro 500 color MFP M570 - Software Technical Reference

Use the Enable Duplex Mode command to print internal diagnostic and test pages on both sides of
the page.
To enable this feature, select the Enable Duplex Mode check box. This box is clear by default.
Figure 3-11 Duplex Mode screen
Network Settings
In the Printer Settings section on the HP Utility main screen, click the Network Settings icon to
open the IPv4 Settings screen.
Figure 3-12 IPv4 Settings screen
This screen provides access to IPv4, IPv6, Bonjour Settings, and Other Settings.
Click the Configuration drop-down menu, to modify the following settings:
●
DHCP
●
BootP
●
Manual
ENWW
Software installation methods
149