HP LaserJet Pro MFP M125-126 M127-128 - User Guide

Congure for an answering machine
If you connect a telephone answering machine to the product, you need to congure the Rings to Answer and
Answer Mode settings for the product. Follow these steps to congure the product:
LCD control panel
1. On the product control panel, press the Setup button.
2. Select Fax Setup, and then select Fax Recv. Setup.
3. Select Rings to Answer.
4. Set the product rings
-to-answer setting for at least one ring more than the number of rings for which
the answering machine is set. Use the keypad to enter the number of rings, and then press the OK
button.
5. Press the Back button to return to the Fax Recv. Setup menu.
6. Select
Answer Mode.
7. Select TAM, and then press the OK button.
With this set
ting, the product listens for fax tones after the answering machine has picked up the call.
The product picks up a call if fax tones are detected.
Touchscreen control panel
1.
Fr
om the Home screen on the product control panel, select Setup
.
2
. Sel
ect
Fax Setup, and then select Basic Setup.
3
. Sel
ect
Rings to Answer.
4. Set the product rings-to-answer setting for at least one ring more than the number of rings for which
the answ
ering machine is set. U
se the k
eypad to enter the number of rings, and then touch the OK
button.
5
. Sel
ect Back to return to the
Basic Setup
menu.
6. Select
Answer Mode.
7. Select TAM, and then touch the OK button.
With this setting, the product listens for fax tones after the answering machine has picked up the call.
The product picks up a cal
l if fax tones are detected.
Congure for an extension phone
If you connect an extension phone to the product, you need to change some fax settings for the product to
work with this conguration. Follow these steps to congure the product:
LCD control panel
1. On the product c
ontrol panel, press the Setup
button.
2. Select Fax Setup, and then select Fax Recv. Setup.
3. Select Extension Phone.
46 Chapter 6 Fax ENWW