HP LaserJet Pro MFP M125-126 M127-128 - User Guide

Control panel overview
●
M125a, M125r, M125ra, M126a
●
M125nw, M125rnw, M126nw
●
M127fn, M127fs, M128fn, M127fp, M128fp
●
M127fw and M128fw
●
Control-panel Home screen (touchscreen only)
M125a, M125r, M125ra, M126a
2 3 4 5
6
1
7
891011
1 LED display screen Displays the number of copies, the level of darkness for copies, and the percentage of copysize
reduction or enlar
gement. It also shows error codes that alert you of problems that require
attention.
2 Up and down arrows Increases or decreases the number of copies, the level of darkness for copies, or the percentage of
copy-size reduction or enlargement.
●
Number of copies: Press the buttons for less than one second to increase or decrease by 1
increment. P
ress the buttons for one second or longer to increase or decrease by 10
increments.
●
Level of darkness for copies: Press the buttons for less than one second to increase or
decrease b
y 1 increment. Press the buttons for one second or longer to increase or decrease
to the maximum or minimum value.
●
Percentage of copy-size reduction or enlargement: Press the buttons for less than one
second to incr
ease or decrease by 10% increments. Press the buttons for one second or
longer to increase or decrease by 100% increments.
3 Reduce/Enlarge copy light Indicates the copy-size reduction or enlargement feature is active.
4 Darker/Lighter copy light Indicates the copy-darkness feature is active.
5 Number Of Copies light Indicates the number-of-copies feature is active.
6 Setup button Scrolls between the copy settings for number of copies, darkness, and copy size for each job. The
default option is the number of copies. To change the default settings for all jobs, scroll to the
setting and then press and hold the button for 3 seconds. When the light is blinking, adjust the
setting. Press this button again to save the setting.
6 Chapter 1 Product introduction ENWW