HP LaserJet Pro MFP M125-126 M127-128 - User Guide

LCD control panel Touchscreen control panel
1.
On the product control panel, press the Setup button.
2
.
Select
Fax Setup
, and then select All Faxes.
3
.
Select
Fax Speed, and then select the correct setting.
1. From the Home screen on the product control panel,
touch the Setup button.
2. Select
Fax Setup
, and then select
Advanced Setup.
3
.
Select
Fax Speed
, and then select the correct setting.
●
Change the fax settings on the control panel to a lower resolution.
NOTE: Higher resolution faxes can take longer to send than lower resolution faxes.
LCD control panel Touchscreen control panel
1
.
On the product control panel, press the Setup button.
2. Select Fax Setup, and then select Fax Send Setup.
3. Select Def. Resolution, and then select the correct
setting.
1
.
From the Home screen on the product control panel,
t
o
uch the Setup button.
2. Select Fax Setup, and then select Advanced Setup.
3. Select Fax Resolution, and then select the correct
setting.
Fax quality is poor
Fax is blurry or too light.
●
Increase fax resolution when sending faxes. Resolution does not aect received faxes.
LCD control panel Touchscreen control panel
1.
On the product control panel, press the Setup button.
2
.
Select
Fax Setup
, and then select Fax Send Setup
.
3
.
Select
Def. Resolution
, and then select the correct
set
ting.
1. From the Home screen on the product control panel,
touch the Setup button.
2. Select
Fax Setup
, and then select
Advanced Setup.
3
.
Select
Fax Resolution, and then select the correct
setting
.
NOTE: Increasing resolution slows transmission speed.
●
Turn on the
Error Correction setting from the control panel.
LCD control panel Touchscreen control panel
1
.
On the product control panel, press the Setup button.
2. Select Fax Setup, and then select All Faxes.
3. Select Error Correction, and then select On.
1
.
From the Home screen on the product control panel,
t
o
uch the Setup
button.
2. Select Service, and then select Fax Service.
3. Select Error Correction, and then select On.
●
Check the toner cartridges and replace the cartridge if necessary.
●
Ask the sender to darken the contrast setting on the sending fax machine, and then resend the fax.
ENWW Solve fax problems 109