HP LaserJet Pro MFP M125-126 M127-128 - User Guide

Improve fax image quality
●
Check the scanner glass for dirt or smudges
●
Check the send-fax resolution setting
●
Check the lightness/darkness setting
●
Check the Error Correction setting
●
Check the Fit-to-Page setting
●
Clean the pickup rollers and separation pad in the document feeder
●
Send to a dierent fax machine
●
Check the sender's fax machine
Check the scanner glass for dirt or smudges
Over time, specks of debris might collect on the scanner glass and white plastic backing, which can aect
performance. Use the following procedure to clean the scanner.
1. Press the power button to turn the product o, and then disconnect the power cable from the electrical
outlet.
2. Open the scanner lid.
3. Clean the scanner glass, the document feeder strips, and the white plastic backing with a soft cloth or
sponge that has been moistened with nonabrasive glass cleaner.
CAUTION: Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on
any part of the product; these can damage the product. Do not place liquids directly on the glass or
platen. They might seep and damage the product.
4. Dry the glass and white plastic parts with a chamois or a cellulose sponge to prevent spotting.
5. Close the scanner lid.
6. Connect the power cable to an outlet, and then press the power button to turn the product on.
Check the send-fax resolution setting
LCD control panel
1. On the product control panel, press the Setup button.
2. Select Fax Setup.
3. Select
Send Fax Setup, and then select Def. Resolution.
4. Select the desired resolution setting, and then press the OK button.
Touchscreen control panel
1.
Fr
om the Home screen on the product control panel, touch the Setup
button.
2. Select Fax Setup.
ENWW Improve fax image quality 97