HP Color LaserJet Pro MFP M176 M177 - Warranty and Legal Guide

Telekomünikasyon (faks) ürünleri için ek bildirimler
AB Telekomünikasyon İşletim Bildirisi
Yazıcı geçerli AB Direktiflerini karşılar ve CE işareti taşır. Ayrıntılar için üretici tarafından bu kılavuzun başka bir
bölümünde sağlanan AB Uyumluluk Beyanı'na bakın.
Analog Genel Aktarmalı Telekomünikasyon Ağları'na (PSTN) bağlanma özelliğine sahip yazıcılar için:
Avrupa'daki özel ulusal PSTN'ler arasındaki farklılıklar nedeniyle ürünün her türlü koşulda tüm PSTN
sonlandırma noktalarında sorunsuz bir şekilde çalışacağı garanti edilemeyebilir. Ağ uyumluluğu, ürünü PSTN'ye
bağlarken müşteri tarafından doğru ayarın seçilmesine bağlıdır. Lütfen kullanıcı el kitabında verilen talimatları
izleyin. Ağ uyumluluğu ile ilgili sorunlar yaş
ıyorsanız lütfen ekipman sağlayıcınızla veya ülkenizdeki HP Inc.
yardım masasıyla iletişime geçin. Bir PSTN sonlandırma noktasına bağlanmak, yerel PSTN operatörü tarafından
belirlenen ek gerekliliklere tabi tutulabilir.
Yasal model SHNGC-1203-01, EN55022 Sınıf A gerekliliklerini karşılar ve bu durumda aşağıdakiler geçerlidir:
"Uyarı: Bu A sınıfı bir üründür. Kapalı ortamda bu ürün radyo parazitine neden olabilir ve bu durumda kullanıcının
gerekli önlemleri alması gerekebilir."
New Zealand Telecom Statements
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the
item complies with minimum conditions for connection to its network. It indicates no endorsement of the
product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item
will work correctly in all respects with another item of Telepermitted equipment of a different make or model,
nor does it imply that any product is compatible with all of Telecom’s network services.
This equipment may not provide for the effective hand-over of a call to another device connected to the same
line.
This equipment shall not be set up to make automatic calls to the Telecom “111” Emergency Service.
This product has not been tested to ensure compatibility with the FaxAbility distinctive ring service for New
Zealand.
Additional FCC statement for telecom products (US)
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the back
of this equipment is a label that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
The REN is used to determine the quantity of devices, which may be connected to the telephone line. Excessive
RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not
all, areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices that may be
connected to the line, as determined by the total RENs, contact the telephone company to determine the
maximum REN for the calling area.
This equipment uses the following USOC jacks: RJ11C.
An FCC-compliant telephone cord and modular plug is provided with this equipment. This equipment is designed
to be connected to the telephone network or premises wiring using a compatible modular jack, which is Part 68
compliant. This equipment cannot be used on telephone company-provided coin service. Connection to Party
Line Service is subject to state tariffs.
42 Bölüm 4 Düzenleme bilgileri TRWW