HP Color LaserJet Pro MFP M176 M177 - Warranty and Legal Guide

Dodatne izjave za telekomunikacione proizvode (faks)
EU izjava o funkcionisanju telekoma
Štampač ispunjava primenjive direktive Evropske unije i u skladu s tim nosi znak CE. Detalje potražite u Izjavi o
saglasnosti sa direktivama Evropske unije koju je izdao proizvođač i koja se nalazi u drugom odeljku ovog
priručnika.
Da biste štampače sa ovom funkcijom povezali sa analognom javnom komutiranom telefonskom mrežom (engl.
Public Switched Telecommunication Networks – PSTN):
Zbog razlika između zasebnih evropskih nacionalnih PSTN mreža, uređaj ne može da garantuje bezuslovno
uspešno funkcionisanje na svakom terminalu PSTN mreže. Mrežna kompatibilnost zavisi od toga da li je korisnik
odabrao ispravna podešavanja prilikom priprema za povezivanje sa PSTN mrežom. Pratite uputstva navedena u
korisničkom uputstvu. Ako se pojave problemi sa kompatibilnošću mreže, obratite se dobavljaču opreme ili HP
Inc. službi za podršku u zemlji rada. Povezivanje sa PSTN terminalom možda podleže dodatnim zahtevima
operatera lokalne PSTN mreže.
Model SHNGC-1203-01 ispunjava zahteve standarda EN55022, klasa A, pri čemu se primenjuje sledeće:
„Upozorenje – Ovo je proizvod klase A. U kućnom okruženju ovaj proizvod može da izazove radio smetnje; u tom
slučaju može biti potrebno da korisnik preduzme odgovarajuće mere.“
New Zealand Telecom Statements
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the
item complies with minimum conditions for connection to its network. It indicates no endorsement of the
product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item
will work correctly in all respects with another item of Telepermitted equipment of a different make or model,
nor does it imply that any product is compatible with all of Telecom’s network services.
This equipment may not provide for the effective hand-over of a call to another device connected to the same
line.
This equipment shall not be set up to make automatic calls to the Telecom “111” Emergency Service.
This product has not been tested to ensure compatibility with the FaxAbility distinctive ring service for New
Zealand.
Additional FCC statement for telecom products (US)
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the back
of this equipment is a label that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
The REN is used to determine the quantity of devices, which may be connected to the telephone line. Excessive
RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not
all, areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices that may be
connected to the line, as determined by the total RENs, contact the telephone company to determine the
maximum REN for the calling area.
This equipment uses the following USOC jacks: RJ11C.
An FCC-compliant telephone cord and modular plug is provided with this equipment. This equipment is designed
to be connected to the telephone network or premises wiring using a compatible modular jack, which is Part 68
compliant. This equipment cannot be used on telephone company-provided coin service. Connection to Party
Line Service is subject to state tariffs.
46 Poglavlje 4 Informacije o propisima SRWW