HP Color LaserJet Pro MFP M176 M177 - User Guide

Congure the product
How you congure the product varies depending on whether you set it up for standalone fax, with an
answering machine, or with an extension phone.
NOTE: Conguring the fax time, date, and header settings is required to use the fax feature.
●
Congure fax time, date, and header
●
Congure for stand-alone fax
●
Congure for an answering machine
●
Congure for an extension phone
Congure fax time, date, and header
You might have congured these settings when you installed the software. You can congure these settings
at any time by using the product control panel or the HP Fax Setup Wizard.
●
Control panel
●
HP Fax Setup Wizard (Windows)
Control panel
1.
From the Home screen on the product control panel, select Setup .
2
. Sel
ect
Fax Setup, and then select Basic Setup.
3
. Sel
ect
Time/Date.
4
. Sel
ect the 12-hour clock or 24-hour clock.
5
. U
se the keypad to enter the current time, and then select OK.
6. Select the date format.
7
. U
se the keypad to enter the current date, and then select OK
.
8. Select
Fax Header
.
9
. U
se the keypad to enter your fax number, and then select
OK.
NOTE: The maximum number of characters for the fax number is 20.
10
. U
se the keypad to enter your company name or header, and then select
OK.
To enter special characters that are not on the standard keypad, select @#$ to open a keypad that
contains special characters.
NOTE: The maximum number of characters for the fax header is 40.
ENWW Connect and congure the product for fax 43