HP DesignJet T2500 Multifunction Printer Series - User guide

●
If the printer is left idle and in manual mode for more than 15 minutes, manual mode is cancelled, and
you are advised to close the stacker.
●
You can exit manual mode from the front panel or by closing the stacker.
Manual mode is indicated in various front-panel screens by the icon.
The basket
The stacker is normally used to collect prints. If you decide not to use the stacker, you can send your prints to
the basket. You may decide to use the basket if the stacker is full, or if you want to separate a job from the
other jobs printed to the stacker.
The basket can accept up to 10 A1 or D-sized sheets of bond paper. Larger prints should be removed from the
basket immediately after printing.
TIP: Ensure that you have routed all cables correctly, so that they do not interfere with paper falling into
the basket. Otherwise you may experience paper jams.
View information about the paper
To view the loaded paper information, press , then if it is not already highlighted, then the roll
icon.
The following information is displayed on the front panel:
●
The paper type you have selected
●
Roll or sheet status
●
Width of the paper in millimeters (estimated)
ENWW The basket 63