HP DesignJet T2500 Multifunction Printer Series - User guide

●
If you put the printer into manual mode from the front panel, all jobs in the queue are put on hold for
manual mode, and you can print them from the queue. When you exit manual mode, any jobs still in the
queue return to their previous status.
NOTE: When opening the stacker to enter manual mode, lock the stacker cover into the open position.
In manual mode:
●
You can print only one page at a time. You must start each page manually from the front panel.
●
You print with the stacker cover open, and stand in front of the printer to check the print as it emerges.
●
With the stacker cover open, you have a better view of the print as it emerges, but the stacker cannot
guarantee that the print will follow the correct paper path, so you must watch over it to prevent
possible damage.
●
You cannot scan or copy because the stacker cover is blocking the scanner.
62 Chapter 6 Paper handling ENWW