HP DesignJet T2500 Multifunction Printer Series - User guide

Information screen
To reach the information screen, press on the home screen.
Information screen dynamic icons
●
Press for information about the paper status.
●
Press for information about the ink cartridge status.
●
Press for information about the printhead status.
●
Press for information about the network status.
●
Press for a list of alerts.
●
Press for information about the printer.
●
Press to view and change printer or scan settings.
Sleep mode
Sleep mode puts the printer into a reduced power state after a period of inactivity, turning off the front-panel
display to save energy. Printer features can be enabled from this mode, and the printer maintains network
connectivity, waking up only as necessary. The printer can be woken from sleep mode by the Power button,
by sending a print job, or by lifting the scanner, opening a roll cover, or opening the stacker cover. The printer
wakes up in several seconds, more quickly than if it is completely turned off. While in sleep mode, the Power
button blinks.
To change the time that elapses before sleep mode, press , then , then Setup > Front panel
options > Sleep mode wait time. You can set a time between 1 and 240 minutes; the default time is 30
minutes.
Printer Monitoring (with the Print Spooler) and Remote Printer Management with the HP Utility and Web
JetAdmin continue to be available during sleep mode. Some remote management tasks offer the option of
remotely waking up the printer if needed to perform the task.
Printer software
The following software is provided for your printer:
ENWW Printer software 11