HP DesignJet T2500 Multifunction Printer Series - User guide

●
The borders of colored blocks are wrongly colored.
To correct this kind of problem:
1. Align the printhead. See Align the printhead on page 228.
2. Reseat the printhead by removing and then reinserting it. See Remove the printhead on page 141 and
Insert the printhead on page 145.
Lines are discontinuous
If your lines are broken in the following way:
1. Check that you are using appropriate print-quality settings. See Printing on page 69.
2. When printing on uncoated paper in Fast mode, try loading the paper as Bright Bond.
3. Align the printhead. See Align the printhead on page 228.
4. Reseat the printhead by removing and then reinserting it. See Remove the printhead on page 141 and
Insert the printhead on page 145.
Lines are blurred
Humidity can cause ink to soak into the paper, making the lines blurred and fuzzy. Try the following:
186 Chapter 21 Troubleshooting print-quality issues ENWW