User Manual

4. Close the top cover.
5. Open the roll cover and rewind the roll. You may feel resistance if the paper is stuck; pull rmly.
6. Reload the roll, or load a new sheet; see Paper handling on page 28.
NOTE: If you nd that there is still some paper causing an obstruction within the printer, restart the procedure
and carefully remove all pieces of paper. You may need to remove the multi-sheet tray (see Multi-sheet tray has
jammed on page 89).
Multi-sheet tray has jammed
If the paper in the multi-sheet tray has jammed, proceed as follows:
1. Remove as much paper as you can from the multi-sheet tray.
2. Push down the multi-sheet tray extensions, which will make the tray easier to handle.
3. Unlock the tray, using the rotary switch behind it.
ENWW Multi-sheet tray has jammed 89