User Manual
If you are satised with your print continue using this calibration for your paper type. If you see
improvement in your print, continue with step three. If you are dissatised with the recalibration, return to
the default calibration, see Return to default calibration on page 76.
Return to default calibration
Returning to the default calibration sets all the corrections made by the paper advance calibration to zero. To
return to the default paper advance calibration value, you must reset the calibration.
1.
From the front panel, tap , then Image Quality Maintenance > Paper advance calibration > Reset ready
paper calibration.
2. Wait until the front panel displays the operation has completed successfully.
Move or store the printer
If you need to move or store the printer, prepare it correctly to avoid possible damage to it. To prepare the printer,
follow the instructions below.
1. Do not remove the ink cartridges or printhead.
2. Make sure that no paper is loaded.
3. Turn o the power using the Power key on the front panel.
4. Unplug the printer's power cord.
5. Disconnect any cables connecting the printer to a network or a computer.
CAUTION: If you turn the printer upside down, ink could escape into the printer and cause serious damage.
When the printer is turned back on, it takes about three minutes to initialize itself and to check and prepare the
printhead. Preparing the printhead normally takes just over a minute. However, if the printer has been o for a
six weeks or more, preparing the printhead could take up to 45 minutes.
CAUTION: If the printer remains o for a long period of time, the printhead may become unusable. In this case,
you need to replace the printhead with a new one.
TIP: Because preparing and purging the printhead uses both time and ink, you are strongly recommended to
leave the printer always on or in sleep mode, whenever possible, to maintain the health of the printhead. In both
cases, the printer wakes up from time to time to maintain the printhead. Thus you can avoid going through
lengthy preparation processes before using your printer.
Firmware update
There are various ways of downloading and installing rmware updates, as described below; you can choose
whichever you nd most convenient.
NOTE: A rmware update package can be large; you may want to consider whether there are any implications
for your network or Internet connection.
You can congure the printer to download rmware updates automatically whenever they become available: see
Automatic rmware update on page 19.
76 Chapter 9 Maintaining the printer ENWW