User Manual

4. If the edge of the roll is not straight or torn (sometimes due to tape used to hold end of the roll), pull the
paper slightly and cut a straight edge.
5. Insert the edge of the paper into the printer.
WARNING! Do not push your ngers inside the printer's paper path.
6. Roll the paper into the printer until you feel resistance and the paper exes slightly. When the printer
detects the paper, it beeps, and feeds in the paper automatically.
7. The front panel prompts you to select the paper category and type.
If you do not see your paper type in the front panel, tap More paper types. If you still cannot nd your paper
type in the whole list, see Paper type is not in the driver on page 86.
8. The printer checks the alignment and measures the width. If the roll is not correctly aligned, follow the
instructions on the front-panel display.
9. If your printer is a T520, close the roll cover.
NOTE: If you have an unexpected issue at any stage of the paper loading process, see Paper cannot be loaded
successfully on page 84.
32 Chapter 5 Paper handling ENWW