User Manual
6. Put the blue paper stop on to the open end of the spindle, and push it towards the end of the roll.
7. Ensure the blue paper stop is pushed in as far as it goes. Check that there is no space between the roll and
the stops at both ends.
If you are a regular user of dierent paper types, you can change rolls more quickly if you preload rolls of
dierent paper types on dierent spindles. Extra spindles are available for purchase, see Accessories
on page 78.
Load a roll into the printer
To start this procedure, you must have a roll loaded on the spindle. See Load a roll onto the spindle on page 29.
1. From the front panel, tap , then Load roll.
This step is optional: if you just start feeding in roll paper, the printer recognizes that you want to load a roll.
2. If your printer is a T520, open the roll cover.
3. Insert the spindle into the printer, holding it by both ends. The blue hub should be on the left, as viewed
from the front of the printer.
ENWW Load a roll into the printer 31