User Manual
● Tap to go to the previous item.
● Tap to go to the next item.
● Tap to go back to the previous screen.
● Tap to cancel the current process.
Home screen dynamic icons
The following items are displayed only on the home screen:
● At the top left of the home screen is a message telling you which paper source is active.
● Tap to view Web Services status and display your printer’s email address.
● Tap to view connectivity status information and to perform network conguration. If a network cable
is connected,
is displayed instead.
NOTE: It is not possible to use wireless and wired network connections simultaneously.
● Tap to view ink information.
● Tap to change printer settings.
● Tap to load, unload, and change options for roll paper.
● Tap to change options for the multi-sheet tray, or to activate it.
● Tap to load, unload, and change options for single sheets.
NOTE:
The active paper source is indicated by a slightly larger icon, with a white tick in a green circle: .
If the printer is left idle for some time, it goes into sleep mode and switches o the front-panel display. To
change the time that elapses before sleep mode, tap , then Printer preferences > Sleep. You can set a time
between 5 and 240 minutes.
The printer wakes from sleep mode and switches on the front-panel display whenever there is some external
interaction with it.
Information about specic uses of the front panel can be found throughout this guide.
Printer software
The following software is provided with your printer:
● The HP-GL/2 and HP RTL driver for Windows (T520 only)
● The PCL3GUI raster driver for Windows (T120 only)
● The PCL3GUI raster driver for Mac OS X
● HP DesignJet Preview
8 Chapter 1 Introduction ENWW