User's Manual

Press the INPUT button on the remote control to select the input signal. Press the SET button to
save your change.
Or, press the SOURCE button on the back side of the monitor panel. Press the AUTO/SET
button to save your change.
a. When connecting with a BNC cable, select AV from the Input menu.
b. When connecting with an S-Video cable, select AV from the Input menu.
NOTE: When the BNC cable is connected simultaneously with S-Video cable, the S-Video
input has a priority.
Connecting Component Input (480p/720p/1080p/1080i/480i)
1. Connect the video/audio cable (not included) as shown in the following illustration, and then
connect the power cord. Connect the Component1 (1) or Component2 (2) input terminal to the
monitor and HDTV receiver.
Figure 3-24 Connecting the BNC and Audio Cables to HDTV Receiver
NOTE: Some devices may require HDCP in order to display HD signals. Component does not
support HDCP.
2. Select an input signal.
Press the INPUT button on the remote control to select the input signal. Press the SET button to
save your change.
Or, press the SOURCE button on the back side of the monitor panel. Press the AUTO/SET
button to save your change.
a. Select Component1 from the Input menu.
b. Select Component2 from the Input menu.
ENWW Connecting to External Devices 17