Compaq WL210 WIRELESS PCI CARD QUICK INSTALL GUIDE

Troubleshooting B-7
Changing TCP/IP Settings
Consult your LAN Administrator for the values of your TCP/
IP settings.
To change the TCP/IP Settings:
1. On the Windows task bar click the
Start button
2. Select
Settings andthenselectControl Panel.
3. On the Control Panel window, double click on the
Network icon to view the Network Properties.
4. From the list of installed components, check if the
TCP/IP
-> Compaq WL110 PC Card
protocol is installed.
If this protocol is not yet installed, click the Add but-
ton and select the TCP/IP protocol from the list. Refer
to the Windows Help for more information.
If this protocol is installed, select this protocol and
click the Properties button. Check if the parameters
resemble the settings provided by your LAN Admin-
istrator. Make Changes if necessary, and click OK
when you’re done.
5. When prompted, restart your computer.