Compaq WL210 WIRELESS PCI CARD QUICK INSTALL GUIDE

B-4 Troubleshooting
Both LEDs blink once
every 10 seconds
The WL110 PC Card works fine, but did not yet
succeed establishing a wireless connection with the
wireless Infrastructure.
Actions:
• Contact the LAN Administrator to verify the
Network Name assigned to the wireless
infrastructure.
• Contact the LAN Administrator to verify the
correct value(s) of the encryption keys.
• Contact the LAN Administrator to verify whether
the network infrastructure has been set to deny
“ANY” as valid Network Name (Closed Network).
• Change the configuration of your WL110 PC Card
to enter the correct Network Name
• If there are no access point devices available,
change the configuration of your WL110 PC Card
to run in “Peer-to-Peer” mode.
Power LED Radio LED Description/Action