Compaq WL210 WIRELESS PCI CARD QUICK INSTALL GUIDE

Installation for Windows 3-11
Basic Settings
To connect to a wireless network, all you need to specify is:
AvalidNetwork Name.
(Optional) a valid Encryption key.
Network Name
The Network Name is a case-sensitive string of alphanumeric
characters in the range of “a” to “z”, “A” to “Z” and “0”to
“9“. It connects you to the wireless LAN, like a cable would
connect a wired computer to an Ethernet LAN.
Valid values are subject to the type of network to which you
wish to connect your computer:
To connect to a WL310 Wireless Home Office Gateway,
enter the 6-digit Network Name that is printed on a label
at the bottom of the WL310 Gateway device.
To connect to a Peer-to-Peer workgroup, enter the name
as agreed upon by the workgroup participants.
If you wish to start a workgroup yourself, enter a name
with a maximum of 32 alphanumeric characters, and
share that value with your workgroup participants.
To connect to an access point, such as the WL410
Wireless SMB Access Point or WL510 Wireless