Compaq WL210 WIRELESS PCI CARD QUICK INSTALL GUIDE

2-6 Install the WL210 Wireless PCI Card
4. Follow the instructions on your screen.
5. To verify if the installation was completed successfully,
proceed as described on page 2-7.
Note: If the CD-ROM does not start automatically:
1. Click the Windows Start button
2. Select
Run
3. Browse to the CD-ROM
4. Double-click the file “
Run_CD.exe”
Installation for MS-Windows NT 4.0
Installing the WL210 Wireless PCI Card in Windows NT 4.0
requires you to install the “PCI Enabler” provided on the CD-
ROM that came with your product.
1. Remove the WL110 Wireless PC Card from the WL210
Wireless PCI Card.
2. Start-up your computer and:
a. Check the blue start-up screen to verify which NT
Service Pack is installed on the computer.
b. Log in as the “Administrator” of the workstation.
If the computer is running with Service Pack v3.0 or
lower, download and install Service Pack v6a from the