Compaq WL210 WIRELESS PCI CARD QUICK INSTALL GUIDE

2-4 Install the WL210 Wireless PCI Card
Configure the WL210 Wireless PCI Card
Most of today’s Microsoft operating systems will
automatically detect and configure the WL210 Wireless PCI
Card hardware. Some of these operating systems however,
may require you to install an additional driver (the PCI
Enabler), to allow you to use the WL210 Adapter in
combination with the WL110 Wireless PC Card.
Therefore, prior to inserting the WL110 PC Card into the PC
Card slot of your WL210 Adapter, follow the installation
instructions as described for your operating system to
complete the installation of the WL210 Adapter.
Installation for MS-Windows 2000
Although the WL210 Wireless PCI Card will work fine in
some computers running Windows 2000, most computer
systems require the Microsoft Service Pack 1 update to allow
“Interrupt Sharing” on the WL210 Adapter.
1. Update your Windows 2000 operating system using
Microsoft’s Windows 2000 Service Pack 1 or higher.
This Service Pack is available from the Microsoft
website at
http://www.microsoft.com.
2. Once you insert the WL210 Wireless PCI Card into your
computer, the operating system will automatically detect
the new hardware and enable the driver.