Reference Guide

Version 1.0.1 17
Table 4 – HP SCSI HBA profile: HPSCSI_DiskDrive.DriveInterface
Value ValueMap
0
Unknown
1
Parallel
2
SATA
3
SAS
4
SATALogical
5
SASLogical
7.4.2 HPSCSI_DiskDrive.DriveRotationalSpeed
This value shall indicate the rotational speed of the drive in Revolutions per minute.
7.4.3 HPSCSI_DiskDrive.DriveHasMNPData
This boolean value shall indicate that the drive supports reporting of Monitoring and Performance data
counters.
7.4.4 HPSCSI_DiskDrive.DrivePlacement
This value shall indicate where the drive is located with respect to the controller.
Table 5 – HP SCSI HBA profile: HPSCSI_DrivePlacement
Value ValueMap
0
Unknown
1
Internal
2
External
7.4.5 HPSCSI_DiskDrive.NegotiatedSpeed
This value shall indicate the current speed of the drive in Bits per second.
7.4.6 HPSCSI_DiskDrive.NegotiatedDataWidth
This value indicates the current width of the bus.
7.5 CIM_ElementStatisticalData
This association shall be used to associate the instance of HPSCSI_MediaAccessStatData to
HPSCSI_DiskDrive instance.
7.6 HPSCSI_MediaAccessStatData
The SNIA Disk Drive Lite profile has been extended to add the class HPSCSI_MediaAccessStatData.
The following properties have been added to model the Monitoring and Performance counter for Hard
Drives connected to SCSI controllers.
7.6.1 HPSCSI_MediaAccessStatData.ECCRecoveredReadErrors
This value indicates the number of ECC Recovered Read Errors as reported by MNP counters.
7.6.2 HPSCSI_MediaAccessStatData.HardReadErrors
This value indicates the number of Hard Read Errors as reported by MNP counters.