Reference Guide

7.7.13 HPSA_MediaAccessStatData.SectorsRead
Value indicates the number of Sectors Read as reported by MNP counters.
7.7.14 HPSA_MediaAccessStatData.SectorsWritten
Value indicates the number of Sectors Written as reported by MNP counters.
7.7.15 HPSA_MediaAccessStatData.SeekCount
Value indicates the Seek Count as reported by MNP counters.
7.7.16 HPSA_MediaAccessStatData.SeekErrors
Value indicates the number of Seek Errors as reported by MNP counters.
7.7.17 HPSA_MediaAccessStatData.SpinUpErrors
Value indicates the number of Spin Up Errors as reported by MNP counters.
7.7.18 HPSA_MediaAccessStatData.DRQTimeOuts
Value indicates the number of DRQ Time Outs as reported by MNP counters.
7.7.19 HPSA_MediaAccessStatData.RetryRecoveredReadErrors
Value indicates the number of Retry Recovered Read Errors as reported by MNP counters.
7.7.20 HPSA_MediaAccessStatData.RetryRecoveredWriteErrors
Value indicates the number of Retry Recovered Write Errors as reported by MNP counters.
7.7.21 HPSA_MediaAccessStatData.FailedReadRecovers
Value indicates the number of Failed Read Recovers as reported by MNP counters.
7.7.22 HPSA_MediaAccessStatData.FailedWriteRecovers
Value indicates the number of Failed Write Recovers as reported by MNP counters.
7.7.23 HPSA_MediaAccessStatData.ServiceHours
Value indicates the number of Service Hours as reported by MNP counters.
7.8 HPSA_TSASSCSIProtocolEndpoint
The HPSA_TSASSCSIProtocolEndpoint class has been extended from CIM_SCSIProtocolEndpoint as
defined in SNIA SAS Target ports profile. The following properties have been added to represent the
protocol (command set) associated to a target port.
7.8.1 HPSA_TSASSCSIProtocolEndpoint.ProtocolIFType
ProtocolIFType is an enumeration that is synchronized with the IANA ifType MIB. Note that if the
ProtocolIFType is set to 1 (Other), then the type information should be provided in the
OtherTypeDescription string property.
60 Version 2.13.1