Reference Guide

Return values for Identify() method shall be the same as specified in Table 14 where the method
execution behavior matches the return code description.
Identify() parameters shall be the same as those specified in Table 15.
7.7 HPSA_MediaAccessStatData
The SNIA Disk Drive Lite profile has been extended to add the class HPSA_MediaAccessStatData. The
following properties have been added to model the Monitoring and Performance counter for Hard Drives
connected to Smart Array controllers.
7.7.1 HPSA_MediaAccessStatData.AbortedCommands
Value indicates the number of Aborted Commands as reported by MNP counters.
7.7.2 HPSA_MediaAccessStatData.BadTargetErrors
Value indicates the number of Bad Target Errors as reported by MNP counters.
7.7.3 HPSA_MediaAccessStatData.ECCRecoveredReadErrors
Value indicates the number of ECC Recovered Read Errors as reported by MNP counters.
7.7.4 HPSA_MediaAccessStatData.FormatErrors
Value indicates the number of Format Errors as reported by MNP counters.
7.7.5 HPSA_MediaAccessStatData.HardReadErrors
Value indicates the number of Hard Read Errors as reported by MNP counters.
7.7.6 HPSA_MediaAccessStatData.HardWriteErrors
Value indicates the number of Hard Write Errors as reported by MNP counters.
7.7.7 HPSA_MediaAccessStatData.HardwareErrors
Value indicates the number of Hardware Errors as reported by MNP counters.
7.7.8 HPSA_MediaAccessStatData.HotPlugCount
Value indicates the Hot Plug Count as reported by MNP counters.
7.7.9 HPSA_MediaAccessStatData.MediaFailures
Value indicates the number of Media Failures as reported by MNP counters.
7.7.10 HPSA_MediaAccessStatData.NotReadyErrors
Value indicates the number of Not Ready Errors as reported by MNP counters.
7.7.11 HPSA_MediaAccessStatData.OtherTimeOuts
Value indicates the number of Other Time Outs as reported by MNP counters.
7.7.12 HPSA_MediaAccessStatData.SCSIBusFaults
Value indicates the number of SCSI Bus Faults as reported by MNP counters.
Version 2.13.1 59