Reference Guide

Value ValueMap OperationalStatus[0]
0x800B
Erase in Progress
Degraded (3)
0x800C
Erase Completed
Degraded (3)
The below OperationalStatus[1] includes the statuses of all paths from an initiator port to a target port on
a disk.
Current HPSA_StorageVolume provider will change to determine status of all paths associated
with storage extents that the volume is based on.
• If any path on any disk making up this volume is currently set to 5 (Path Error) and there still
exists at least one path that is active and the volume is currently ok then:
o OperationalStatus [0]: 3 (degraded)
o OperationalStatus[1]: 32781 (0x800D) (
Physical Path In Error)
• If all paths on all disks are set to 5 (Path Error) then:
o OperationalStatus[0]: 6 (error)
o OperationalStatus[1]: 32781 (0x800D) (
Physical Path In Error)
• The below OperationalStatus[1] reflects the extended status of the logical volume which
participates in Encryption.
Value ValueMap OperationalStatus[0] Additional
Comments
0x800E
No Access Encrypted with No Controller Key
Error(6)
Logical volume is
encrypted and
cannot be accessed
because the
controller has not
received the key yet
(from iLO) nor was
it found in the
controller’s Critical
Security
ParametersNVRAM
0x8010
No Access Encrypted with Controller
Encryption Not Enabled
Error (6)
Logical volume is
encrypted and cannot be
accessed because the
controller does not have
encryption enabled
0x8011
Transforming from Unencrypted to Encrypted
Degraded(2)
Logical volume is being
migrated from
unencrypted to
encryoted, and volume is
online.
54 Version 2.13.1