Reference Guide

Table 186 - HP Smart Array profile: HPSA_DiskDrive.MediaType
Value ValueMap
0
Unknown
1
Rotational Platters
2
Solid State
7.3.4 HPSA_DiskDrive.NegotiatedSpeed
Indicates the current speed of the drive in Bits per second.
Possible Parallel Values are
Table 197 - HP Smart Array profile: HPSA_DiskDrive.NegotiatedSpeed Parallel
Value Notes
0
Unknown
41943040
5 MBytes/sec
83886080
10 MBytes/sec
167772160
20 MBytes/sec
335544320
40 MBytes/sec
671088640
80 MBytes/sec
1342177280
160 MBytes/sec
2684354560
320 MBytes/sec
Possible Serial Values are
Table 18 - HP Smart Array profile: HPSA_DiskDrive.NegotiatedSpeed Serial
Value Notes
0
Unknown
1500000000
1.5 GBits/sec
3000000000
3 GBits/sec
6000000000
6 GBits/sec
7.3.5 HPSA_DiskDrive.NegotiatedDataWidth
Indicates the current width of the bus. Supported values are
Table 19 - HP Smart Array profile: HPSA_DiskDrive.NegotiatedDataWidth
Value ValueMap
0
Unknown
1
SAS/SATA serial
8
Narrow
16
Wide
7.3.6 HPSA_DiskDrive.Identify(uint32 Duration)
This method will cause the hard drive to set some indicator (e.g. set or blink drive LEDs) for the given
duration (default duration is 30 seconds). After the duration has expired the drive indicator will return to
normal use.
Return values for Identify() method shall be the same as specified in Table 14 where the method
execution behavior matches the return code description.
Identify() parameters shall be the same as those specified in Table 15.
48 Version 2.13.1