Reference Guide

Table 14 - HP Smart Array profile: HPSA_ArraySystem.Identify() Method: Return values
Value ValueMap
0
Request was successfully executed
1
Method not supported
2
Error occurred
Identify() parameters are specified in Table 15.
Table 15 - HP Smart Array profile: HPSA_ArraySystem.Identify() Method: Parameters
Qualifiers Name Type Description
IN
Duration
uint32
n - Number of seconds to set identifier.
NULL – default of 30 secs.
After the duration has expired the drive
indicator(s) will return to normal use.
7.2.2 HPSA_ArraySystem.Dedicated
Enumeration indicating the purpose(s) to which the ComputerSystem is dedicated, if any, and what
functionality is provided.
Table 16 - HP Smart Array profile: HPSA_ArraySystem.Dedicated
Value ValueMap
30,15
Host Hardware Raid Controller, Block Server
3 ,15
Storage (External) , Block Server
7.3 HPSA_DiskDrive
The HPSA_DiskDrive class has been extended from CIM_DiskDrive as defined in SNIA Disk Drive Lite
profile.
7.3.1 HPSA_DiskDrive.TotalPowerOnHours
Value indicates the total number of hours that the drive has logged with power on.
7.3.2 HPSA_DiskDrive.DriveInterface
Value indicates the type of interface for the disk. (E.g. Parallel, SATA, SAS)
Table 175 - HP Smart Array profile: HPSA_DiskDrive.DriveInterface
Value ValueMap
0
Unknown
1
Parallel
2
SATA
3
SAS
4
SATALogical
5
SASLogical
7.3.3 HPSA_DiskDrive.MediaType
Value indicates the media type of the disk.
Version 2.13.1 47