Reference Guide

22 Version 1.0.1
Table 7 – Class: HP_DriveCage
Properties
Requirement
Notes
CreationClassName
M
Key
Tag
M
Key
ElementName
M
User friendly Name
DriveBays
O
(see section 7.3.1)
DuplexLocation
O
(see section 7.3.2)
BackplaneSpeed
O
(see section 7.3.3)
Model
M
SerialNumber
M
PartNumber
M
Manufacturer
M
Name
M
Version
M
10.4 CIM_SystemComponent
CIM_SystemComponent is used to model the association between HP_StorageEnclosureProcessor and
the Scoping CIM_ComputerSystem instance. Table 8 shows the properties that shall be implemented for
the CIM_SystemComponent class and its subclasses.
Table 8 – Class: CIM_SystemComponent
Properties
Requirement
Notes
GroupComponent
M
Key, Scoping CIM_ComputerSystem Instance
PartComponent
M
Key
10.5 CIM_SystemPackaging
CIM_SystemPackaging is used to model the association between HP_StorageEnclosureProcessor and
the physical HP_StorageEnclosure instance. Table 9 shows the properties that shall be implemented for
the CIM_SystemPackaging class and its subclasses.
Table 9 – Class: CIM_SystemPackaging
Properties
Requirement
Notes
Antecedent
M
Key, CIM_PhysicalElement
Dependent
M
Key, CIM_System
10.6 CIM_Containner
CIM_Container is used to model the association between HP_StorageEnclosure and the physical
HP_DriveCage instance. Table 10 shows the properties that shall be implemented for the CIM_Container
class and its subclasses.