Reference Guide

Version 1.0.1 21
Table 5 – Class: HP_StorageEnclosureProcessor
Properties
Requirement
Notes
CreationClassName
M
Key
Name
M
Key
NameFormat
M
Shall be set to “Other”
OperationalStatus
M
(see section 7.1.1)
ElementName
M
Dedicated
M
(see section 7.1.2)
OtherDedicatedDescriptions
M
(see section 7.1.3)
10.2 HP_StorageEnclosure
HP_StorageEnclosure is a subclass of CIM_Chassis and is used to model the physical chassis for an HP
Storage Enclosure. Error! Reference source not found. shows the properties that shall be implemented
for the HP_StorageEnclosureProcessor class and its subclasses.
Table 6 – Class: HP_StorageEnclosure
Properties
Requirement
Notes
CreationClassName
M
Key
Tag
M
Key
ElementName
M
User friendly Name
Location
M
(see section 7.2.1)
Model
M
(see section 7.2.2)
SerialNumber
M
(see section 7.2.3)
PartNumber
M
(see section 7.2.4)
Manufacturer
M
(see section 7.2.5)
Name
M
(see section 7.2.6)
Version
M
(see section 7.2.7)
10.3 HP_DriveCage
HP_DriveCage is a subclass of CIM_PhysicalPackage and is used to model the physical cage for an HP
Drive Cage. Table Error! Reference source not found. shows the properties that shall be implemented
for the HP_StorageEnclosureProcessor class and its subclasses.