Reference Guide

20 Version 1.0.1
Figure 6 shows an embedded Smart Array controller connected to internal and external storage
enclosures. By using CIM_SystemComponent association from the HPSA_ArraySystem instance should
yield two instances of HPSA_StorageEnclosureProcessor. Location of each enclosure can be determined
by traversing the CIM_SystemPackaging association to the HPSA_StorageEnclosure instance and
inspecting the Location property.
By using same process as detailed for Figure 4, the location strings for both disk drives should look like
Internal Drive – “Box 1, Port 2I, Bay 5”
External Drive – “Box 2, Port 1E, Bay 1”
10 CIM Elements
The implementation requirements for the classes and properties described in this section are defined in
the “Implementation Requirements” section (see Section 7).
Table 4 – CIM Elements – HP Storage Enclosure Profile
Element Name
Requirement
Description
Classes
HP_StorageEnclosureProcessor
Mandatory
See Section 7
HP_StorageEnclosure
Mandatory
See Section 7
HP_DriveCage
Mandatory
See Section 7
CIM_SystemPackaging
Mandatory
CIM_SystemComponent
Mandatory
CIM_Container
Mandatory
HP_Location
Mandatory
HP_RegisteredProfile
Mandatory
See Section 10.7
Indications
None defined.
10.1 HP_StorageEnclosureProcessor
The HP_StorageEnclosureProcessor is used to model an HP storage enclosure. Error! Reference source
not found. shows the properties that shall be implemented for the HP_StorageEnclosureProcessor class
and its subclasses.