System information

Administrator’s Guide www.hp.com 4-7
XFce Settings Manager
TouchScreen
Select Enable EloTouch to enable support for an Elo touch screen.
Touch Screen tab
USB Storage
Select Enable USB Storage to enable USB automounting and
redirection on the thin client. USB automounting allows the thin
client to automatically recognize USB devices plugged in to the USB
port. USB redirection allows a remote session to access devices that
you plug into your local thin client USB ports.
The thin client supports a maximum of five USB storage devices per
session with the following mix:
Up to four simultaneous disk-on-key devices or hard drives and one
CD-ROM. The thin client recognizes only the first partition of a USB
hard drive. You can mount only one CD-ROM drive per session.
✎
The thin client supports up to four USB devices; however, you can
use a USB hub to access additional USB devices.
To view the files on the USB drive key, use the
ls command.
To copy files to/from the USB drive key, use the
cp command.
Examples:
■ cp /mnt/dok/printcap.txt /etc/printcap
■ cp printcap /mnt/dok/printcap.1