System information

Administrator’s Guide www.hp.com 2-19
HP Connection Administrator
■ Connection to the following local devices:
❏ disk drives - Type the path or symbolic link.
❏ printers - Type the path to the printer.
❏ parallel ports - Type the location of the physical device. The
default is
/dev/lp0.
❏ serial ports - Type the location of the physical device. The
default is
/dev/tty50.
For more information, type the
rdesktop command in the console.
✎
To forward rdesktop connections, HP recommends redirecting from
/tmp/shared/ for hard drives and disks-on-key. As you add and remove
devices, the system automatically creates links in this location.
This setting is valid only for the session during which it was created.
✎
CD-ROM forwarding is not supported.