Compaq TL881 MiniLibrary Drive Upgrade Procedure (May 1999)

2 TL881 MiniLibrary Drive Upgrade Procedure
Table 1
Parts Location
Number Part
(1) Magazine door
(2) Door opener/Magazine lock
(3) Shuttle cable
(4) Shuttle
(5) Shuttle motor
(6) Drive caddy assembly
(7) Fan
(8) Power supply
(9) Controller PWB
(10) AC power switch
(11) Control panel
(12) Unlock/open switch
(13) Magazine security lock
(14) Leadscrew
Overall Procedure
NOTE:
If the base module is part of an expanded TL881 MiniLibrary subsystem, refer to
the
TL881 Mini Library Service Manual for information on removing the base module
from the subsystem.
To add a second drive to the base module you must do the following steps.
1. Remove the skin cover, if present, using the procedure in this
document.
2. Remove the cover plate using the procedure in this document.
3. Remove the drive caddy assembly using the procedure in this
document.