Compaq TL881 MiniLibrary Drive Upgrade Procedure (May 1999)

Adding a Second Tape Drive
IMPORTANT:
All screws that do not use lock washers, captive washers or lock nuts
must have Loctite 222 applied when parts are reassembled in the field. If you ignore this
step, you might cause premature failure of the mechanism.
Parts Location
Figure 1 shows the location of most of the field replaceable parts. Table 1
describes the parts.
1
14
2
3
4
5
6
7
8
9
1011
12
13
SHR-1201
Figure 1. Parts Location